The new impressive 3D printer in the Creality CR10 series! This version adds a stabilization support kit, improving the stability of the frame dramatically, for the best quality prints. With its build volume of 450X450X470mm it is an impressive machine!
This 3D printer has the reliability you are used of the Creality brand and improves upon the CR10 series with the lastest and greatest of the 3D printer market. As opposed to other printers in the CRF10 line, the printer has a heated bed that uses the full surface to heat with its powerful 24V heater, powered by a separate power supply for the best performance and fastest heating possible.Due to the dual timing belts the bed is more stable than most printers of this size and moves smoothly back and forth.
As with all new models in the Creallity series this printer has a BL Touch for easy automatic bed leveling. After a first calibration, there is no longer the need to fiddle with the bed position before starting a print. A big advantage of the BL Touch is that it retracts after calibration and is out of the way while printing.
For the best reliability the latest improvements of 3D printing are included, including a filament detection sensor to avoid filament run-out while printing. If the filament runs out, the 3D printer is paused. No more failed prints due to empty filament spools! The resume function enables you to continue printing after a filament run-out or power failure while printing from SD. This printer uses the best material available for 3D printers for the extruder system. The PTFE tubing is replaced by official Capricorn tubing for the best throughput of filament and it can withstand higher temperatures much better. And with the dual filament driving gear by Bondtech, the grip on the filament is extraordinary, resulting in the highest and most reliable filament extrusion!
The printer supports printing from SD card (also included) and can be controlled with its easy to use HD LCD interface, so you don't need to have your computer connected while printing.
Included with the CR10 Max 3D printer is:
|Bed breedte||45 cm|
|Bed diameter||45 cm|
|Resolutie Z-as||0.1 mm|
|Filament typen||PLA, PETG, TPU|
|Filament diameter||1.75 mm|
|Max. hot-end temperatuur||250 °C|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
|Max. verwarmd bed temp.||100 °C|
|Scherm type||Kleuren LCD met touchscreen|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
|Automatische Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.