Frame components
Everything to assemble the frame of your 3D printer, like corner connectors, end caps, t-slots etc. Also pre-cut frame sets are available here. For studs and bars see their separate category here.
Aluminum corner connector for 30x30 aluminum extrusion.
- For 30x30 aluminum extrusion
- Includes two M6x10 screws and M6 nuts
- Material: Aluminum
€ 3,75
Op voorraad
Aluminum corner connector for 30x30 aluminum extrusion.
- For 30x30 aluminum extrusion
- Includes four M6x10 screws and M6 nuts
- Material: Aluminum
€ 5,50
Op voorraad
Aluminum corner connector for 20x20 aluminum extrusion.
- For 20x20 aluminum extrusion
- Includes four M4x6 screws and M4 nuts
- Material: Aluminum
€ 4,25
Op voorraad
Aluminum corner connector for 20x20 aluminum extrusion.
- For 20x20 aluminum extrusion
- Includes two M4x6 screws and M4 nuts
- Material: Aluminum
€ 2,99
Op voorraad
Create an invisible yet strong connection between two 20x20 aluminum profiles
- Invisible yet strong connection
- Between two 20x20 aluminum profiles
€ 2,50
Op voorraad
Create an invisible yet strong connection between two 30x30 aluminum profiles.
- Invisible yet strong connection
- Between two 30x30 aluminum profiles
€ 3,75
Op voorraad
Create an invisible yet strong connection between two 30x30 aluminum profiles.
- Invisible yet strong connection
- Between two 30x30 aluminum profiles
€ 3,75
Op voorraad
These covers can be used for the 20x20 bars and will make your design look neatly and professional.
- Make your design look neatly and professional
- Suited for bars: 20x20
€ 5,45
Op voorraad
Carbon tubes that help you position your extruder on the Kossel delta printer.
- For the Kossel delta printer
- Material: Carbon
€ 18,25
Op voorraad
Cube connector piece 2D for two 2020 extrusions at 90°.
- Connects two 2020 extrusions at 90°
- Comes with bolts, nuts and end caps
€ 7,50
Op voorraad
Creality 3D
The stabilization kit for the Creality CR-10S5 will improve your printers reliability and stability.
- Make your printer more reliable and stable
- Dramatic increase in print quality on larger prints
- All tools to install this upgrade are included in the kit
€ 43,95
Op voorraad
Creality 3D
The stabilization kit for the Creality CR-10(S) will improve your printers reliability and stability.
- Make your printer more reliable and stable
- Dramatic increase in print quality on larger prints
- All tools to install this upgrade are included in the kit
€ 34,95
Op voorraad
Connection plate for lengthening 20x20 extrusions or make a T connection between 20x20 and 20x40 extrusions.
- Lengthening or making a T-connection between extrusions
- Mounting holes: 4
- Diameter holes: 5.5mm
€ 3,75
Op voorraad
Mounting piece for rotating axis, great for your Z-axis or CNS machine.
- Fasten the rod using the two set-screws in the bearing
- This package includes two pieces
€ 7,50
Op voorraad
This aluminum plate allows you to make a L-connection of 90° between 20x20 aluminum extrusion bars.
- Make a L-connection of 90° between 20x20 aluminum extrusion bars
- Mounting holes: 5
- Diameter holes: 5.7mm
€ 6,50
Op voorraad
This aluminum plate allows you to make a L-connection of 90° between 30x30 aluminum extrusion bars.
- Make a L-connection of 90° between 30x30 aluminum extrusion bars
- Mounting holes: 5
- Diameter holes: 5.7mm
€ 7,50
Op voorraad
Strong steel mounting plate for easy mounting of a NEMA17 stepper motor to your 3D printer frame.
- Easy mounting of a NEMA17 stepper motor to your 3D printer frame
- Dimensions: 50 x 50 x 52mm
€ 5,89
Op voorraad
The vibration absorper is great for mounting on 20x20mm aluminum extrusions at the bottom of your 3D printer.
- Absorbs most of the vibrations
- Greatly reducing the noise
€ 2,99
Op voorraad
Vibration absorper foot for your 3D printer
- In total 35mm with 22mm thread
- Absorbs most of the vibrations
- Greatly reducing the noise
€ 3,75
Op voorraad
Vibration absorper foot for your 3D printer
- In total 45mm with 34mm thread
- Absorbs most of the vibrations
- Greatly reducing the noise
€ 3,75
Op voorraad
Flexible black plastic that fits nicely in 20x20 aluminum extrusions.
- 6mm For 20x20 Aluminum extrusions
- Color: Black
€ 1,95
Flexible gray plastic that fits nicely in 20x20 aluminum extrusions.
- 6mm For 20x20 Aluminum extrusions
- Color: Gray
€ 1,95
Op voorraad
Flexible green plastic that fits nicely in 20x20 aluminum extrusions.
- 6mm For 20x20 Aluminum extrusions
- Color: Green
€ 1,95
Flexible red plastic that fits nicely in 20x20 aluminum extrusions.
- 6mm For 20x20 Aluminum extrusions
- Color: Red
€ 1,95
Op voorraad
Flexible blue plastic that fits nicely in 20x20 aluminum extrusions.
- 6mm For 20x20 Aluminum extrusions
- Color: Blue
€ 1,95
Op voorraad
Flexible yellow plastic that fits nicely in 20x20 aluminum extrusions.
- 6mm For 20x20 Aluminum extrusions
- Color: Yellow
€ 1,95
Op voorraad
Flexible black plastic that fits nicely in 30x30 aluminum extrusions.
- 8mm For 30x30 Aluminum extrusions
- Color: Black
€ 2,45
Op voorraad
Flexible gray plastic that fits nicely in 30x30 aluminum extrusions.
- 8mm For 30x30 Aluminum extrusions
- Color: Gray
€ 2,45
Op voorraad
Flexible green plastic that fits nicely in 30x30 aluminum extrusions.
- 8mm For 30x30 Aluminum extrusions
- Color: Green
€ 2,45
Op voorraad
Flexible red plastic that fits nicely in 30x30 aluminum extrusions.
- 8mm For 30x30 Aluminum extrusions
- Color: Red
€ 2,45
Op voorraad
Flexible blue plastic that fits nicely in 30x30 aluminum extrusions.
- 8mm For 30x30 Aluminum extrusions
- Color: Blue
€ 2,45
Op voorraad
Flexible yellow plastic that fits nicely in 30x30 aluminum extrusions.
- 8mm For 30x30 Aluminum extrusions
- Color: Yellow
€ 2,45
Op voorraad
Great way to mount smooth rods for linear guiding to your 3D printer frame horizontally.
- For 8mm smooth rod
- Contains two pieces
€ 8,99
Op voorraad
The SHF8 Axis mount is a great way to mount smooth rods for linear guiding to your 3D printer frame horizontally.
- For 8mm smooth rod
- This package includes two pieces
€ 8,99
Op voorraad
SK10 Axis mount for 10mm smooth rod for linear guiding to your 3D printer frame vertically.
- Axis mount for 10mm smooth rod
- For linear guiding to your 3D printer frame vertically.
€ 7,25
Op voorraad
The SK8 Axis mount is a great way to mount smooth rods for linear guiding to your 3D printer frame horizontally.
- For 8mm smooth rod
- This package includes two pieces
€ 7,25
Op voorraad
Waarom ReprapWorld?
- Zelfde werkdag verzonden!
- 3.000+ producten in ons assortiment
- Meer dan 45.000 tevreden klanten in meer dan 40 landen
- Veilig betalen met diverse betalingsopties
- Professionele technische ondersteuning (meer dan 10 jaar 3D ervaring)
45.000+ tevreden klanten
Betaal veilig met
