Solving issues with movement of axis in your 3D printer

Deals will end in:
  • Dagen
  • Uren
  • Minuten
  • Seconden

If you have a problem with the movement of one or more axis of your 3D printer, there are some thing you can check or do. First step is determining the cause of the problem. The following list of common issues and solutions may help you with determining the problem and fix it.

Issue
The movement of the axis is not smooth and movement stutters

Possible causes
1. There is too much friction on the axis, use some lubrication on the axis and bearings
2. One or more bearing are worn out, replace them with a new one

Issue
The printer randomly shifts the position during a print

Possible causes
1. It may be caused by a overheating stepper driver. If the driver is overheating, it shuts down a short time, causing a shift. Add more cooling or reduce the current.
2. Also, it can be cause by having too much friction on the axis. Especially on higher speeds the stepper driver may skip steps if under powered. You can try increasing the current of the motor, lubrication the axis, or increase the input voltage if possible.

Waarom ReprapWorld?
  • Zelfde werkdag verzonden!
  • 3.000+ producten in ons assortiment
  • Meer dan 45.000 tevreden klanten in meer dan 40 landen
  • Veilig betalen met diverse betalingsopties
  • Professionele technische ondersteuning (meer dan 10 jaar 3D ervaring)
45.000+ tevreden klanten

4.3 sterren op Google

Betaal veilig met


Over ReprapWorld
ReprapWorld

RepRapWorld is de nummer één webshop voor al uw reprap benodigdheden voor uw 3D printer. We hebben een grote collectie 3D-printer onderdelen, van onze beroemde elektronica lijnen tot filament van onze eigen productie. En dit alles aan een zeer scherpe prijs!

Contact

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2020 | ReprapWorld B.V.