Deals will end in:
  • Dagen
  • Uren
  • Minuten
  • Seconden

Creality 3D

CR-20 pro

Improve version of the CR20, with even better electronics auto bed-leveling and almost no assembly
  • Build volume: 220x220x250mm
  • Heated bed: Yes
  • LCD+SD card: Yes
  • Materials: PLA, PETG, ABS
  • Filament diameter: 1.75mm
  • Auto bed leveling: Yes
SKU:CR20PRO
GTIN:8719345011122
Voorraad: >50
€ 339,65  incl BTW Op voorraad
Zelfde werkdag verzonden!

Productbeschrijving

Upgrade to the popular CR-20 3D Printer. Comes with graphical display, heated bed and SD-card. Requires only a few minutes of basic assembly. No hardware experience required!

The CR-20 Pro adds several nice features on top of the already-impressive CR-20:

  • The power supply has been upgraded to a high quality 24V MeanWell supply
  • High precison BT touch z-height sensor mounted next to the toolhead compartment, paired with..
  • Bed leveling autocalibration routine initiated from graphical controller
  • Magnetic sticker sheet securely attaches the build surface to the bedplate

The CR-20 Pro kit is professionally packaged and contains two logically-divided sections (the horizontal and vertical frame) that can be assembled in minutes using only a few screws; the tools are included, and hardware experience is not required. Most of the frame is made from black aluminum V-slot extrusions and in combination with the bowden system for the extruder, results in an efficient, sturdy frame with 0.1mm Z-axis print precision. The dual sided lead screws on the Z-axis ensure good layer stacking and thus high quality prints. The new v2.1 controller board makes it a stable and smooth printing experience, with a convenient menu system navigable using the sturdy dial. The printer includes a heated bed which reduces the risk of print warping or detachment during printing, and the graphical display + SD slot allows for standalone printing. The heated bed's flexible, magnetically-attached print surface is easy to remove from the rest of the bed plate, allowing for faster and easier 3D print removal.

For new 3D printing enthusiasts: 3D printers runs off of so-called "gcode" files, which are generated from free software slicers such as Slic3r or Cura. Most modern printers (including Crealitys) can run their gcode prints either via an integrated SD or mini-USB slot for stand-alone printing, or from a seperate PC or laptop via the USB slot. In case of power failure, Creality's printers have a "recovery" mode that allows for resuming the print from the LCD interface once power is restored, an essential sanity-saving feature to avoid the frustration of wasted time and filament.

A small "starter" spool of filament is included in the kit, but it won't last long! We recommend including in your purchase a larger spool of Real filament or a multi-color PLA sample pack to assist you in your upcoming exploration of all the colorful things you can print with your new Creality!

The kit includes the following items:

  • Power cable
  • USB cable
  • Spare pneufit coupling
  • Spare nozzle
  • Spatula
  • Filament cutter
  • USB-stick with SD card
  • Sample PLA for testing
  • Assembly tools

Documentatie

Specificaties

Bouwvolume
Bed breedte 22 cm
Bed diepte 22 cm
Bouwhoogte 25 cm
Resolutie Z-as 0.1 mm
Extruder eigenschappen
Aantal extruders 1
Diameter nozzle 0.4
Filament typen PLA,ABS,PETG
Filament diameter 1.75 mm
Max. hot-end temperatuur 260 °C
Boog

Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here

Max. verwarmd bed temp. 100 °C
Dimensies
Breedte 42 cm
Hoogte 47 cm
Diepte 41 cm
Algemeen
Elektronica Creality Controlbox
Scherm type Grafisch LCD
Besturingsknoppen 1
Eigenschappen
SD-kaart

A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.

Verwarmd Bed

A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.

More info

Automatische Bed Leveling

The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.

Camera
WIFI

This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.

Netwerk

This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.

€ 339,65  incl BTW Op voorraad
Zelfde werkdag verzonden!

Verbruiksmaterialen

CR-20 pro gerelateerde producten om je op gang te houden.

Lubrication and maintenance

Super lube ( 7 ml )
Perfect for lubrication of bearings and linear sliders
€ 7,50

Upgrades

Gesuggereerde verbeteringen voor jouw CR-20 pro.

Ender 3 Polypropylene build plate ( 235x235mm )
Creality 3D
Original polypropylene build surface for Creality 3D CR-20 (pro) or Ender 3 (pro)
€ 19,50
Official Capricorn TL PTFE tubing set for Creality 3D printers
Capricorn
€ 26,55
Official Capricorn XS PTFE tubing set for Creality 3D printers
Capricorn
€ 26,55
BL Touch auto bed leveling kit (V1.0)
Creality 3D
Official upgrade kit for Creality 3D printers with a BL touch sensor for auto bed leveling
€ 49,75
Ender3 (PRO) Ultrabase carbon build plate ( 235x235x4mm )
Creality 3D
Original Ender3 Ultrabase glass sheet upgrade
€ 24,50
All Metal Hotend Kit for Creality 3D printers|1.75mm filament
Micro Swiss
High quality full metal hotend with titanium heatbreak, compatible with MK8 hotends
€ 73,50

Over ReprapWorld
ReprapWorld

RepRapWorld is de nummer één webshop voor al uw reprap benodigdheden voor uw 3D printer. We hebben een grote collectie 3D-printer onderdelen, van onze beroemde elektronica lijnen tot filament van onze eigen productie. En dit alles aan een zeer scherpe prijs!

Contact

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2020 | ReprapWorld B.V.