Productbeschrijving
Hervulling Paars ABS filament voor je 3D-printer, inclusief een chip, zodat het naadloos werkt met je XYZ Printing da Vinci 3D-printer. Dit is een 0.6 kg vervangende rol van 1.75 mm diameter die past bij de da Vinci 3D-printer cartridge.
De filament komt zonder cartridge, controleer alsjeblieft hier voor informatie over hoe je het filament moet vervangen in je printer. Deze filament is compatibel met de volgende 3D-printers:
- da Vinci 1.0A
- da Vinci 2.0A Duo
- da Vinci 1.0 AiO
Specificaties
| sku | XYZRABSPURPLE0600MM175 |
|---|---|
| gtin | 4715872745848 |
| mpn | RF10BXEU07B |
| Filament eigenschappen | |
| Gewicht filament | 600 g |
|
Materiaal The base material used in the filament. For more information on the different materials, please check the Filament information page |
ABS |
| Variant | PLA |
| Kleur | Paars |
| Kleur (op label) | Druif Paars |
| Diameter | 1.75 mm |
| Diameter tolerantie | 0.05 mm |
| NFC-chip | |
| Printeigenschappen | |
| Temperatuur - extruder | 220 °C |
|
Gebruiksgemak How much 3D printing experience is recommended before using this material. |
|
|
Hechting van het printbed Determines how easy the material adheres to the printbed and can be removed from the bed without damaging either the bed or the print. |
|
|
Printsnelheid The speed at which the material can be extruded. This is determined by how fast it melts and how viscous it is. |
|
|
Geur How much smell does the filament produce while printing and how bad is the smell. More stars is better |
|
| Materiaaleigenschappen | |
|
Stijfheid How tough is the material. From 1 star (very brittle) to very tough |
|
|
Weerstand buitenshuis How well can this product be used in an outside environment. The material has to be able to withstand UV-radiation from the sun as well as water and cold weather. |
|
|
Slagvastheid The amount of energy that a material can withstand when a load is suddenly applied to it. It may also be defined as the threshold of force per unit area before the material undergoes fracture/ |
|
|
Vervormingstemp. How well can the material handle temperatures before it starts to deform. |
|
| Maatvoering spoel | |
| Buitenste diameter | 168 mm |
| Binnenste diameter | 50 mm |
| Breedte | 54 mm |
| Gewicht spoel | 200 g |
| 1 - 9: | excl € 24,75 incl € 29,95 |
| 10 - 29: | excl € 23,51 incl € 28,45 |
| 30 - : | excl € 22,28 incl € 26,96 |
| Groter aantal nodig? Neem contact op met Verkoopafdeling. | |
Gerelateerde productenGerelateerde producten
Discover products that go hand in hand with the ABS Grape Purple Filament - 1.75 mm / 0.6 kg Refill. These are products that have been purchased the most with the ABS Grape Purple Filament - 1.75 mm / 0.6 kg Refill. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.
